Home » DIY Tutorials » Make your own Dolman Style Shirt — with a Wide Waistband

Make your own Dolman Style Shirt — with a Wide Waistband

 Every now and then, I like to share a loved post from the past.  Some are 3, 4, and even 5 years old (wow, has it been that long?)…..but are such fun projects to make.  I revive my old tutorials all the time for myself and pull up the instructions on how I made something, so I can make it again.  And even though some of you may remember this, many of you are new around here…….so today’s post, is an oldie but goodie!!

. . . . .


This Dolman Style Shirt with a Banded Bottom was originally posted 2/29/2012


I went to the store this past Saturday, looking for a new shirt. Chloe was tagging along with me so I knew I only had a short while before nap time and then my happy little shopping companion would fizzle. So I looked. And looked some more. And couldn’t find a shirt that looked right/fit right/felt right. Bummer. (But let me tell you, I found oodles of other things that I didn’t know I “needed” until I got there, like those jeans that were actually long enough……..without letting out the hem. Gah. Oh, and that striped knit button-less cardigan from jcrew. So light and breezy and perfect for spring. Why does that happen?!!) Anyway, my shirt hunt was cut short by a messy diaper. So I gave up on my shirt hunt (which wasn’t going well anyway), and headed home. And realized that I better dig through my fabric and try the homemade route. What was I thinking……..that I was actually going to find a shirt at the store, like a normal person?! Ha.


Once I got home, I pulled out some old striped jersey knit that I bought back when I lived in GA. And then thought of something that would be perfect for it.


I kept it simple and cut out a very forgiving Dolman style shirt, with a nice wide waistband.


Now I have a new shirt, no thanks to any retail store that I visited last Saturday.



And oh those sleeves. So comfy.





The dolman style isn’t clingy but the banded bottom still flatters. Cool.




And because it’s made just for me, the length is right, the sleeves are right, and the neckline is right. Hooray.




Sometimes I don’t want to make something that I need/want. I just want to buy it.


But then, I can’t find that “something” that I want. So I end up making it…..and maybe loving it even more.





This Dolman Style Shirt with a Banded Bottom was originally posted 2/29/2012



Want to make one of your own?


***Here’s a list of my favorite sewing supplies, in case you need a few ideas.

***Check out my Sewing Terms 101 post, for additional help.


Okay, grab some jersey knit. Nothing too stiff. I was originally going to use an oversized knit maxi skirt that I bought a year or so ago (to use for the fabric)…..but then I remembered about this striped fabric that I had stashed away. Just keep in mind that if you can’t find any knit at the fabric store/online, check out the clearance racks. You may find some great large pieces of knit just hanging there, waiting to be re-purposed.


Now, the shape of this shirt is nice and big and roomy up top and then a fitted bottom band to keep it snug on the hips while the middle remains a bit baggy. You can make it all fitted from right below the bust line if you keep the cut of the sides more narrow. Or keep it wider and more baggy. It’s up to you. I used a knit shirt of mine as guide but didn’t actually cut that shape. I used the same neckline shape but didn’t cut a different front and back piece. Both my front and back pieces are exactly the same. Both have the same swoop as the back of the black shirt I was using as my guide. Then, I cut a straight (but slightly downward) line from the neck out to the end of the sleeve length that I wanted. And then made a nice big arm and curved the under side of each sleeve to meet with the sides of the shirt. Because knit hangs, these sleeves will kind of hang and drape nicely. The length of the shirt is variable. I made it a little longer than I needed because I was worried about it being too short. Because after you add the band that sits snuggly on the hips, the part above that (where it would hit your abdomen) will kind of bunch up and look a bit more baggy. If you don’t make the shirt extra long, you won’t have that baggy look in the middle. And if that’s what you prefer, go for it. (Make sure to include a little extra on all sides for a seam allowance.)


Like mentioned above, I cut my front and back pieces exactly the same. But if you want your front neck line to swoop downward a bit more, cut accordingly. Then I sewed the front and back pieces together, with right sides together, right along the top of each sleeve and then along each side of the shirt.

(HINT: When sewing with knits, it helps me to increase the stitch length just a bit to help jump over more fabric, eliminating some of the stretching and bunching. For the step shown below, I used a straight stitch but a zig-zag would work too. Practice on scrap pieces of the knit you’re working with, to get a feel for it first.)


Then I cut a strip of fabric that was twice as tall as the band height that I wanted (because you fold it in half) and then long enough to go all the way around the bottom of the shirt.


Then, I cut a little bit off the width of the strip of fabric so that the band would end up slightly smaller than the bottom of the shirt. Because you want it to slightly pull the bottom of the shirt in. Not tons, just a bit. And how much you cut off really depends on how stretchy your knit is so you may have to try on the shirt and then wrap the band section around you to see how much smaller to make it, to have a snugg-ish fit around your hips.


Then fold the strip in half (with right sides together) and sew the two ends together.


Now you have a circle of fabric. Next, fold down the tube down into itself, creating a double layered circle of fabric, matching up the two raw edges of fabric. (Right side of the fabric is facing outward.) Pin edges, to keep them together.


If you lay this folded tube down, you should see that it’s slightly smaller than the bottom width of the shirt. That’s a good thing.


Next, slide the tube up and around the bottom of the shirt, matching up all raw edges together. Now, you will have to stretch the band just a bit, to get it match up just raw with the bottom of the shirt. Evenly distribute the tube around the bottom of the shirt. Pin in place.


Now sew these 3 layers (1 layer of shirt and 2 layers of tube) together, sewing all the way around the bottom of the shirt. Use a very narrow zig-zag stitch (or something similar) to allow the fabric to stretch even after it’s sewn. Because you want it to stretch around your hips.


Here’s a peek of the inside.


Then fold under the sleeves and sew a straight line or two (or a zig-zag) to give each sleeve a nice finished look. I actually used a double needle here, making a perfectly spaced double line. (More on the double needle here.)


For the neckline, I cut a strip of the same fabric (one of the darker red stripes) and used that for my neckline. (Make a circle out of your strip of fabric and then fold it down into itself to create the neckline piece. The same concept as the bottom band of the shirt, shown above.) I attached my neckline, just like I did here but no, you don’t have to have ribbing…….just pull it slightly as you are attaching it to the shirt, so that it is slightly smaller than the shirt opening. (Once it’s in, steam flat like crazy. This will help put your neckline lay flat and in place and not look so handmade.)



Now, here’s the basic finished shape. The armpits are tons lower than normal, the sleeves way bigger, and the shirt is longer than you’re used to. Perfect.

(Be sure to iron/steam all of your seams open and flat. This will help shrink any “stretched seams” and will help your top look more professional.)



And that’s it.





Ashley Johnston

Administrator at Make It & Love It
Ashley Johnston is a professional DIY costume maker, sewist, crafter, and owner of Make It & Love It. She is a mom of 5 and a wife to a very patient (with the craft clutter) husband. In case you’re wondering, she always chooses crafting/sewing/designing over mopping/dusting/wiping base boards……but bathrooms/laundry/full bellies are always attended to. Whew!

  • Save

Hi, I'm Ashley

Hi, I’m Ashley—the DIY-enthusiast behind this crazy blog!

Back to Top
Share via
Copy link